logo
উদ্ধৃতি
পণ্য
পণ্য
বাড়ি > পণ্য > Epoxy Powder Coating > Weather-resistant double-layer anti-corrosion powder
ক্যাটাগরিগুলি
পরিচিতি
পরিচিতি: Mr. Sindara Steel
ফ্যাক্স: 86-731-89695778
এখনই যোগাযোগ করুন
আমাদের মেইল করুন

Weather-resistant double-layer anti-corrosion powder

পণ্যের বিবরণ

উৎপত্তি স্থল: চীন

পরিচিতিমুলক নাম: Sindara steel

সাক্ষ্যদান: ISO 9001, ISO 14001, ISO 45001, CE

মডেল নম্বার: (স্ট্যান্ডার্ড GB/T 42541-2023)

পেমেন্ট ও শিপিংয়ের শর্তাবলী

ন্যূনতম চাহিদার পরিমাণ: 1টন

মূল্য: 100USD-5000USD

ডেলিভারি সময়: 10-30 দিন

পরিশোধের শর্ত: এল/সি, টি/টি

যোগানের ক্ষমতা: 1000000

সেরা দাম পান
বিশেষভাবে তুলে ধরা:

double-layer anti-corrosion powder

,

Weather-resistant anti-corrosion powder

Weather-resistant double-layer anti-corrosion powder

Description

 

Weather-resistant double-layer anti-corrosion powder(Standard GB/T 42541-2023)

 

The product is subject to GB/T 42541-2023 standard, which is a powder coating

composed of bottom epoxy powder and surface polyester powder.It is suitable for overhead steel pipe with nominal diameter of 15mm and working temperature of-30℃ ~100℃.In case of other working conditions, you can refer to the standard.

 

1. Application scope and characteristics

 
Anti-corrosion protection of outdoor pipes, pipe fittings, elbows and other products.

Compared with other types of coatings, environmental protection, easy to thick coating, good adhesion, with excellent cathode stripping ,anti-corrosion properties and mechanical damage resistance.

It has wide application range, and wide operating temperature range (-30℃~80℃).The broken areas are easy to repair.
 

2. Method and dosage

 

1 . Coating method: Electrostatic spraying,thermal spraying.

2 . Theoretical dosage:150g/M2/100μm.

3 .Surface treatment: Sandblasting or Pelblasting, or other suitable methods.

4 .Curing instructions:The powder coating is applied on the surface of 180~230℃ preheated workpiece, powder coating according to the bottom layer and surface layer (provided by the same manufacturer, with obvious color difference) sequential spraying, primary film, cured by waste heat, and generally does not need later heating. If the ambient temperature is very low or the heat capacity of the workpiece is insufficient, additional heating and curing is required.

 

3.Production Department

 

Weather-resistant double-layer anti-corrosion powder 0 Weather-resistant double-layer anti-corrosion powder 1 Weather-resistant double-layer anti-corrosion powder 2

 

4. Paking

 

Weather-resistant double-layer anti-corrosion powder 3 Weather-resistant double-layer anti-corrosion powder 4 Weather-resistant double-layer anti-corrosion powder 5